MS · NAS · AN · BAC hardware · quotation on requestsales@fastenspec.com
FSFASTENSPECMILITARY STANDARD HARDWARE
CatalogueStandardsPart numbersAboutRequest a quote

2302A115

Pin

2302A115 — Pin product render

Datasheet — 2302A115

2302A115 is a pin in the Other & OEM Numbers family, catalogued under pins. The prefix identifies the standard that governs the part; the suffix sets the size, length or finish defined by that drawing. It is quoted against the part number, quantity and any drawing or NSN reference.

Features

  • Clevis, taper, dowel, spring and cotter pin families
  • Diameter, length and head style set by the dash number
  • Drilled shanks for cotter pins and safety wire
  • CRES, alloy steel, brass and titanium options
  • Concentricity and diameter inspection
  • Protective packing for small and long pins

Specification

2302A115 — part data
Part number2302A115
DescriptionPin
Standard familyOther & OEM Numbers
CategoryPins
Prefix / series2302A115
Thread / sizeSet by the dash number on the controlling drawing
Material optionsCRES, alloy steel, brass, titanium
Finish optionsPassivation, cadmium, anodise, dry film
NSNConfirmed on quotation
DocumentationC of C and material certificate on request
ConditionStated on quotation
PriceQuotation only

Part-level fields are confirmed against the controlling drawing. Options listed are category references, not a guarantee of availability for this number.

Applications

  • Clevis and linkage joints
  • Hinge and pivot points
  • Alignment and dowelling
  • Retention and locking

Standards and documentation

Pin part numbers encode the diameter and length; the drawing defines the fit and finish. Where a pin is used in a safety-critical joint, confirm the drawing revision and material condition before ordering.

MS pins · NAS pins · AN pins

Questions buyers ask

How do I confirm the exact dimensions of 2302A115?

The dash suffix sets the size, length or finish defined by the controlling standard. Send the drawing revision with the enquiry and we confirm the dimensions against it before quoting.

Can 2302A115 be supplied in a different finish or material?

For pins, the usual options are passivation, cadmium, anodise, dry film. Alternatives that stay within the same standard can be quoted; anything outside it needs the drawing and engineering approval.

What documentation is available with 2302A115?

Certificate of conformance and a mill material certificate are available with the quotation. Dimensional reports, first-article inspection and NSN confirmation can be added if the order requires them.

Related part numbers

Part numberDescriptionFamily
2302A114PinOther & OEM Numbers
2302A116PinOther & OEM Numbers
2302A113PinOther & OEM Numbers
2302A55PinOther & OEM Numbers
2301A9PinOther & OEM Numbers
23055A001PinOther & OEM Numbers
2301A8PinOther & OEM Numbers
23055A002PinOther & OEM Numbers
Part numbers and family data are reference information. Confirm dimensions, material and finish against the controlling drawing before use; the product illustration is representative of the part family, not a controlled drawing of this exact dash number.

Send a part number. Get a quotation.

Quantity, condition and documentation confirmed in writing. No prices are published; every line is quoted.

Request a quote