MS · NAS · AN · BAC hardware · quotation on requestsales@fastenspec.com
FSFASTENSPECMILITARY STANDARD HARDWARE
CatalogueStandardsPart numbersAboutRequest a quote

7142N15

Bushing

7142N15 — Bushing product render

Datasheet — 7142N15

7142N15 is a bushing in the Other & OEM Numbers family, catalogued under bushings & sleeves. The prefix identifies the standard that governs the part; the suffix sets the size, length or finish defined by that drawing. It is quoted against the part number, quantity and any drawing or NSN reference.

Features

  • Plain, flanged and sleeve bushing families
  • Bore and outside diameter set by the dash number
  • Bronze, brass, aluminium and CRES options
  • Press-fit and shrink-fit installation
  • Wall thickness and concentricity inspection
  • Bulk or kit packing

Specification

7142N15 — part data
Part number7142N15
DescriptionBushing
Standard familyOther & OEM Numbers
CategoryBushings & Sleeves
Prefix / series7142N15
Thread / sizeSet by the dash number on the controlling drawing
Material optionsBronze, brass, aluminium, CRES
Finish optionsAs machined, anodise, passivate
NSNConfirmed on quotation
DocumentationC of C and material certificate on request
ConditionStated on quotation
PriceQuotation only

Part-level fields are confirmed against the controlling drawing. Options listed are category references, not a guarantee of availability for this number.

Applications

  • Pivot and hinge wear surfaces
  • Housing bore repair
  • Actuator and linkage bushings
  • Airframe structural joints

Standards and documentation

Bushings are installed with an interference fit and often reamed after installation. Confirm the housing bore and the installed tolerance against the drawing before ordering.

NAS bushings · MS bushings

Questions buyers ask

How do I confirm the exact dimensions of 7142N15?

The dash suffix sets the size, length or finish defined by the controlling standard. Send the drawing revision with the enquiry and we confirm the dimensions against it before quoting.

Can 7142N15 be supplied in a different finish or material?

For bushings & sleeves, the usual options are as machined, anodise, passivate. Alternatives that stay within the same standard can be quoted; anything outside it needs the drawing and engineering approval.

What documentation is available with 7142N15?

Certificate of conformance and a mill material certificate are available with the quotation. Dimensional reports, first-article inspection and NSN confirmation can be added if the order requires them.

Related part numbers

Part numberDescriptionFamily
7142N14BushingOther & OEM Numbers
7142N16BushingOther & OEM Numbers
7142N13BushingOther & OEM Numbers
7142N17BushingOther & OEM Numbers
7142N12BushingOther & OEM Numbers
7142N18BushingOther & OEM Numbers
7142N11BushingOther & OEM Numbers
7142N19BushingOther & OEM Numbers
Part numbers and family data are reference information. Confirm dimensions, material and finish against the controlling drawing before use; the product illustration is representative of the part family, not a controlled drawing of this exact dash number.

Send a part number. Get a quotation.

Quantity, condition and documentation confirmed in writing. No prices are published; every line is quoted.

Request a quote