MS · NAS · AN · BAC hardware · quotation on requestsales@fastenspec.com
FSFASTENSPECMILITARY STANDARD HARDWARE
CatalogueStandardsPart numbersAboutRequest a quote

7291N21

Bushing Grommet

7291N21 — Bushing Grommet product render

Datasheet — 7291N21

7291N21 is a bushing grommet in the Other & OEM Numbers family, catalogued under bushings & sleeves. The prefix identifies the standard that governs the part; the suffix sets the size, length or finish defined by that drawing. It is quoted against the part number, quantity and any drawing or NSN reference.

Features

  • Plain, flanged and sleeve bushing families
  • Bore and outside diameter set by the dash number
  • Bronze, brass, aluminium and CRES options
  • Press-fit and shrink-fit installation
  • Wall thickness and concentricity inspection
  • Bulk or kit packing

Specification

7291N21 — part data
Part number7291N21
DescriptionBushing Grommet
Standard familyOther & OEM Numbers
CategoryBushings & Sleeves
Prefix / series7291N21
Thread / sizeSet by the dash number on the controlling drawing
Material optionsBronze, brass, aluminium, CRES
Finish optionsAs machined, anodise, passivate
NSNConfirmed on quotation
DocumentationC of C and material certificate on request
ConditionStated on quotation
PriceQuotation only

Part-level fields are confirmed against the controlling drawing. Options listed are category references, not a guarantee of availability for this number.

Applications

  • Pivot and hinge wear surfaces
  • Housing bore repair
  • Actuator and linkage bushings
  • Airframe structural joints

Standards and documentation

Bushings are installed with an interference fit and often reamed after installation. Confirm the housing bore and the installed tolerance against the drawing before ordering.

NAS bushings · MS bushings

Questions buyers ask

How do I confirm the exact dimensions of 7291N21?

The dash suffix sets the size, length or finish defined by the controlling standard. Send the drawing revision with the enquiry and we confirm the dimensions against it before quoting.

Can 7291N21 be supplied in a different finish or material?

For bushings & sleeves, the usual options are as machined, anodise, passivate. Alternatives that stay within the same standard can be quoted; anything outside it needs the drawing and engineering approval.

What documentation is available with 7291N21?

Certificate of conformance and a mill material certificate are available with the quotation. Dimensional reports, first-article inspection and NSN confirmation can be added if the order requires them.

Related part numbers

Part numberDescriptionFamily
7291N19Bushing GrommetOther & OEM Numbers
7291N22Bushing GrommetOther & OEM Numbers
7291N18Bushing GrommetOther & OEM Numbers
7291N23Bushing GrommetOther & OEM Numbers
7291N17Bushing GrommetOther & OEM Numbers
7291N24Bushing GrommetOther & OEM Numbers
7291N16Bushing GrommetOther & OEM Numbers
7291N25Bushing GrommetOther & OEM Numbers
Part numbers and family data are reference information. Confirm dimensions, material and finish against the controlling drawing before use; the product illustration is representative of the part family, not a controlled drawing of this exact dash number.

Send a part number. Get a quotation.

Quantity, condition and documentation confirmed in writing. No prices are published; every line is quoted.

Request a quote