MS · NAS · AN · BAC hardware · quotation on requestsales@fastenspec.com
FSFASTENSPECMILITARY STANDARD HARDWARE
CatalogueStandardsPart numbersAboutRequest a quote

AP50N10

Compression Tube Hose Fit Sleeve

AP50N10 — Compression Tube Hose Fit Sleeve product render

Datasheet — AP50N10

AP50N10 is a compression tube hose fit sleeve in the Other & OEM Numbers family, catalogued under bushings & sleeves. The prefix identifies the standard that governs the part; the suffix sets the size, length or finish defined by that drawing. It is quoted against the part number, quantity and any drawing or NSN reference.

Features

  • Plain, flanged and sleeve bushing families
  • Bore and outside diameter set by the dash number
  • Bronze, brass, aluminium and CRES options
  • Press-fit and shrink-fit installation
  • Wall thickness and concentricity inspection
  • Bulk or kit packing

Specification

AP50N10 — part data
Part numberAP50N10
DescriptionCompression Tube Hose Fit Sleeve
Standard familyOther & OEM Numbers
CategoryBushings & Sleeves
Prefix / seriesAP50N10
Thread / sizeSet by the dash number on the controlling drawing
Material optionsBronze, brass, aluminium, CRES
Finish optionsAs machined, anodise, passivate
NSNConfirmed on quotation
DocumentationC of C and material certificate on request
ConditionStated on quotation
PriceQuotation only

Part-level fields are confirmed against the controlling drawing. Options listed are category references, not a guarantee of availability for this number.

Applications

  • Pivot and hinge wear surfaces
  • Housing bore repair
  • Actuator and linkage bushings
  • Airframe structural joints

Standards and documentation

Bushings are installed with an interference fit and often reamed after installation. Confirm the housing bore and the installed tolerance against the drawing before ordering.

NAS bushings · MS bushings

Questions buyers ask

How do I confirm the exact dimensions of AP50N10?

The dash suffix sets the size, length or finish defined by the controlling standard. Send the drawing revision with the enquiry and we confirm the dimensions against it before quoting.

Can AP50N10 be supplied in a different finish or material?

For bushings & sleeves, the usual options are as machined, anodise, passivate. Alternatives that stay within the same standard can be quoted; anything outside it needs the drawing and engineering approval.

What documentation is available with AP50N10?

Certificate of conformance and a mill material certificate are available with the quotation. Dimensional reports, first-article inspection and NSN confirmation can be added if the order requires them.

Related part numbers

Part numberDescriptionFamily
AN912-8JPipe BushingAN Series
AN912-9DPipe BushingAN Series
AP50N04Flared Tube Fitting SleeveOther & OEM Numbers
AS12872Sleeve BushingAS Series
AS12881BushingAS Series
AS3220-04Tube Fitting Flared SleeveAS Series
AS4824N03Flared Tube Fitting SleeveAS Series
AS4824N04Flared Tube Fitting SleeveAS Series
Part numbers and family data are reference information. Confirm dimensions, material and finish against the controlling drawing before use; the product illustration is representative of the part family, not a controlled drawing of this exact dash number.

Send a part number. Get a quotation.

Quantity, condition and documentation confirmed in writing. No prices are published; every line is quoted.

Request a quote