MS · NAS · AN · BAC hardware · quotation on requestsales@fastenspec.com
FSFASTENSPECMILITARY STANDARD HARDWARE
CatalogueStandardsPart numbersAboutRequest a quote

MS51844-62

Wire Rope Swaging Sleeves

MS51844-62 — Wire Rope Swaging Sleeves product render

Datasheet — MS51844-62

MS51844-62 is a wire rope swaging sleeves in the MS Series family, catalogued under bushings & sleeves. The prefix identifies the standard that governs the part; the suffix sets the size, length or finish defined by that drawing. It is quoted against the part number, quantity and any drawing or NSN reference.

Features

  • Plain, flanged and sleeve bushing families
  • Bore and outside diameter set by the dash number
  • Bronze, brass, aluminium and CRES options
  • Press-fit and shrink-fit installation
  • Wall thickness and concentricity inspection
  • Bulk or kit packing

Specification

MS51844-62 — part data
Part numberMS51844-62
DescriptionWire Rope Swaging Sleeves
Standard familyMS Series
CategoryBushings & Sleeves
Prefix / seriesMS51844
Thread / sizeSet by the dash number on the controlling drawing
Material optionsBronze, brass, aluminium, CRES
Finish optionsAs machined, anodise, passivate
NSNConfirmed on quotation
DocumentationC of C and material certificate on request
ConditionStated on quotation
PriceQuotation only

Part-level fields are confirmed against the controlling drawing. Options listed are category references, not a guarantee of availability for this number.

Applications

  • Pivot and hinge wear surfaces
  • Housing bore repair
  • Actuator and linkage bushings
  • Airframe structural joints

Standards and documentation

Bushings are installed with an interference fit and often reamed after installation. Confirm the housing bore and the installed tolerance against the drawing before ordering.

NAS bushings · MS bushings

Questions buyers ask

How do I confirm the exact dimensions of MS51844-62?

The dash suffix sets the size, length or finish defined by the controlling standard. Send the drawing revision with the enquiry and we confirm the dimensions against it before quoting.

Can MS51844-62 be supplied in a different finish or material?

For bushings & sleeves, the usual options are as machined, anodise, passivate. Alternatives that stay within the same standard can be quoted; anything outside it needs the drawing and engineering approval.

What documentation is available with MS51844-62?

Certificate of conformance and a mill material certificate are available with the quotation. Dimensional reports, first-article inspection and NSN confirmation can be added if the order requires them.

Related part numbers

Part numberDescriptionFamily
MS51844-45Wire Rope Swaging SleeveMS Series
MS51844-48Wire Rope Swaging SleeveMS Series
MS51844-61Wire Rope Swaging SleeveMS Series
MS51844-63Wire Rope Swaging SleeveMS Series
MS51844-82Wire Rope Swaging SleeveMS Series
MS51844-84Wire Rope Swaging SleeveMS Series
NAS1057T3-020Sleeve SpacerNAS Series
NAS1057T3A-025Sleeve SpacerNAS Series
Part numbers and family data are reference information. Confirm dimensions, material and finish against the controlling drawing before use; the product illustration is representative of the part family, not a controlled drawing of this exact dash number.

Send a part number. Get a quotation.

Quantity, condition and documentation confirmed in writing. No prices are published; every line is quoted.

Request a quote