MS · NAS · AN · BAC hardware · quotation on requestsales@fastenspec.com
FSFASTENSPECMILITARY STANDARD HARDWARE
CatalogueStandardsPart numbersAboutRequest a quote

NAS574-2

Straight Headless Pin

NAS574-2 — Straight Headless Pin product render

Datasheet — NAS574-2

NAS574-2 is a straight headless pin in the NAS Series family, catalogued under pins. The prefix identifies the standard that governs the part; the suffix sets the size, length or finish defined by that drawing. It is quoted against the part number, quantity and any drawing or NSN reference.

Features

  • Clevis, taper, dowel, spring and cotter pin families
  • Diameter, length and head style set by the dash number
  • Drilled shanks for cotter pins and safety wire
  • CRES, alloy steel, brass and titanium options
  • Concentricity and diameter inspection
  • Protective packing for small and long pins

Specification

NAS574-2 — part data
Part numberNAS574-2
DescriptionStraight Headless Pin
Standard familyNAS Series
CategoryPins
Prefix / seriesNAS574
Thread / sizeSet by the dash number on the controlling drawing
Material optionsCRES, alloy steel, brass, titanium
Finish optionsPassivation, cadmium, anodise, dry film
NSNConfirmed on quotation
DocumentationC of C and material certificate on request
ConditionStated on quotation
PriceQuotation only

Part-level fields are confirmed against the controlling drawing. Options listed are category references, not a guarantee of availability for this number.

Applications

  • Clevis and linkage joints
  • Hinge and pivot points
  • Alignment and dowelling
  • Retention and locking

Standards and documentation

Pin part numbers encode the diameter and length; the drawing defines the fit and finish. Where a pin is used in a safety-critical joint, confirm the drawing revision and material condition before ordering.

MS pins · NAS pins · AN pins

Questions buyers ask

How do I confirm the exact dimensions of NAS574-2?

The dash suffix sets the size, length or finish defined by the controlling standard. Send the drawing revision with the enquiry and we confirm the dimensions against it before quoting.

Can NAS574-2 be supplied in a different finish or material?

For pins, the usual options are passivation, cadmium, anodise, dry film. Alternatives that stay within the same standard can be quoted; anything outside it needs the drawing and engineering approval.

What documentation is available with NAS574-2?

Certificate of conformance and a mill material certificate are available with the quotation. Dimensional reports, first-article inspection and NSN confirmation can be added if the order requires them.

Related part numbers

Part numberDescriptionFamily
NAS607-2-3Straight Headless PinNAS Series
NAS607-3-4Straight Headless PinNAS Series
NAS607-4-4Straight Headless PinNAS Series
NAS607-4-7Straight Headless PinNAS Series
NAS607-4-8Straight Headless PinNAS Series
NAS561P4-18Spring PinNAS Series
NAS561P5-10Spring PinNAS Series
NAS561S3-6Spring PinNAS Series
Part numbers and family data are reference information. Confirm dimensions, material and finish against the controlling drawing before use; the product illustration is representative of the part family, not a controlled drawing of this exact dash number.

Send a part number. Get a quotation.

Quantity, condition and documentation confirmed in writing. No prices are published; every line is quoted.

Request a quote